Screen for Dometic fridge

€9,00

Derzeit sind Einheiten schnell verfügbar. Weitere Einheiten können kurzfristig hergestellt oder beschafft werden. Dies dauert meist 2-5 Tage.

Info erhalten, wenn verfügbar?

Unfortunately, the Dometic fridge is brighter than the moon at night, so we designed a cover. The remedy with small webcam covers was not so successful and thanks to Mike, who didn't give up, I came up with the idea of how the original cover can be variably clamped into the gap above the refrigerator.

A cover suitable for a gap between 3-5 mm

If your gap is larger, just send me a short request. The actual spring is 2.1mm thick and therefore the gap must be at least 2.5mm thick so that the component can be inserted there.

Note: The panel must not be pushed in front of the fan openings, as this will impede air circulation and the refrigerator will overheat and no longer provide sufficient cooling capacity.

Hinweis: Die Blende darf nicht vor die Lüfteröffnungen geschoben werden, da dadurch die Luftzirkulation behindert wird und der Kühlschrank überhitzt und keine ausreichende Kühlleistung mehr liefert.

PETG - material info

About this stuff

I rely on Prusament PETG for all components that have to be stable and elastic. For example with clamps. Printing with this material is very reliable and the material is not as expensive as other materials. That's why I tend to use it for almost everything that doesn't require structural rigidity or would even be a hindrance. The good properties during production have a positive effect on the price. The high-gloss surface looks more plastic than other matt materials.

Visit www.prusament.com for more information on this print material

ChalkyBlue

CarmineRed

ClearTransparent

GoldenYellow

JetBlack

JungleGreen

LipstickRed

MangoYellow

NeonGreen

OceanBlue

PistachioGreen

SignalOrange

SignalWhite

Terracotta Light

Ultramarine Blue

urban grey

RecycledDark

This material does not have a fixed color and is more likely to be described as a warm brown black. It is made from PETG leftovers.

Marke: SMaker3D

Alle Artikel unter der Marke SMaker3D werde von der uniforx GmbH als Produkt oder Dienstleistung angefertigt.

uniforx GmbH
Prof.-Messerschmitt-Str. 1
85579 Neubiberg
Deutschland
contact@uniforx.com

Tags: für Dometic für Knaus stream_Accessoires

Lokal - Deutschland

Von der Idee über die Entwicklung und Produktion bis hin zur Logistik findet alles in Neubiberg Nahe München statt. Keine langen Lieferketten und direkt aus der lokalen video factory.